User Manual

Bar’s Leaks Head Gasket Fix Continued Page | 2
Bar’s Products, 10386 N. Holly Rd., Holly MI 48442 USA
E-mail: [e-mail] Web: www.barsleaks.com Phone: [phone]
What are the dosage recommendations?
One (24 oz) bottle treats cooling systems from 6 quarts (1.5 gallons) to 16 quarts (4.0 gallons).
Use ½ bottle for smaller cooling systems from 4 quarts (1.0 gallon) to 5.9 quarts (1.49 gallons). For
larger systems use 1 bottle for every 4 gallons.
I accidently added the Bar’s Leaks Head Gasket Fix into my gas tank, what should I do?
Bar’s Leaks Head Gasket Fix is only designed to be added to the cooling system. If the product is
installed in the gas tank, the tank should be removed and cleaned out by a professional mechanic.
Do not start or drive vehicle.
I accidently added the Bar’s Leaks Head Gasket Fix into my engine oil, what should I do?
Bar’s Leaks Head Gasket Fix is only designed to be added to the cooling system. If the product is
installed in the engine oil and the engine has not been started, in many cases you can remove the
valve cover and drain the oil leaving the drain plug off. Then use an engine flush washing out the
head keeping special attention to the oil return holes that run down to the oil pan. Clean these out
and pour the engine flush down these holes flushing everything into the oil pan and out the drain
hole. If the engine has been run, you need to take the vehicle to have a professional mechanic
evaluate what can be done to clean the inside of the engine. This might include taking the engine
apart to clean all of the parts.
Will Bar’s Leaks plug my heater core?
No, Bar’s Leaks Head Gasket Fix will not clog your clean heater core, it is safe and effective.
Note: If using Bar’s Leaks Head Gasket Fix to stop heater core leaks, make sure you turn your heater
control to HOT. Some vehicles have a valve that controls coolant flow through the core.