User Manual
Congratulations on your purchase of the finest Glass Washer made. Bar Maid
®
machines
are manufactured and tested to meet the toughest safety and sanitation standards.
Please follow these instructions carefully. Failing to do so in some cases may damage the
machine, cause injury to the operator and/or void warranty.
FOR WARRANTY SERVICE INFORMATION PLEASE CALL 1-866-531-6243.
For other parts or trouble-shooting service information, visit
WWW.GLASSWASHERPARTS.COM or contact us at the Bar Maid Customer
Service line at 954-960-1468
CARE AND MAINTENANCE /
OPERATING INSTRUCTIONS
IMPORTANT SAFEGUARDS!! PLEASE READ THIS FIRST:
= The exclamation point
within a triangle is to alert the
user to:
• “Caution” important information
regarding the care and use of this
equipment
• “Warning” possibility of
personal injury
= Triangle with fuse
symbol is to alert user to
fuse type and rating
= Lightning flash within
a triangle, is to alert the user
of the presence of dangerous
voltage that may create a risk
of electric shock. Do not
open cover. No user
serviceable parts within.
= Power off
= Power on
Follow these basic safety precautions when using electrical appliance to
reduce the risk of fire, electric shock and/or personal injury
These caution marks are located throughout this guide and on your Glass Washer
WARNING: “A” Model Upright machine motors are water resistant but NOT
SUBMERSIBLE. Do not use “A” Model Upright machines in sinks or tanks
where there is a risk of falling over or submersing the motor.
WARNING: Observe the water level labels on machines. Do not overfill tanks.
Never fully submerse any Glass Washer motor.
WARNING: Special SS Model cord requires original replacement part available
only from Bar Maid Corporation. Contact Bar Maid Corporation for replacement.
WARNING: Motors may get hot with extended use. Turn off when not in use.
WARNING: Plug unit *)'2 into a outlet that matches the
voltage/cycle as listed on the motor. Outlet must be equipped with a UL/CSA
approved ground-fault circuit interrupter (G.F.C.I.).
WARNING: Keep electrical cord clear of brushes and water.
WARNING: Switches and switch boxes (for SS Model) must NOT contact water.
ATTACH BOX TO A DRY LOCATION with screws provided.