Operation Manual

1
OPERATION MANUAL OF TPMS SENSOR
MODEL: TPMS-CG
Thank you for choosing our TPMS. This guide instructs the technician how to properly
mount and dismount a BHsens TPMS clamp-in sensor.
Introduction of TPMS-CG
TPMS-CG is the transmitting module in TPMS. Its working frequency is 433.92MHz;
-20dBm transmitting power -60dBm.Power supply: Battery. The communication
mode between TPMS-CG and receiving module is RF wireless communication. The
module detect pressure and temperature inner the tire periodically and send these
information via RF output circuit to the receiving module. One can manually detect data
inner tire by LF wake-up tools. Install it on the rim together with cycle valve.
PART ONE MOUNTING AND DISMOUNTING OF TRANSMITTER
1. Mounting of Transmitter
1.1 Identify Transmitter
Check whether the prepared sensor is the same with the image below.
Note: Only plastic or aluminum caps, aluminum valves and nickel plated valve cores can be
used when replaced.

Summary of content (4 pages)