Specifications

72
9. Electrical system
9.1 General description
The electric system for this forklift truck is single wire system with minus earth. It
mainly consists of the following systems:
(1) Charge system
This system contains generator, battery, charging indicator, etc. It supplies
current for all the electric appliances.
Voltage: 12V (DC)
(2) Starting system
This system mainly consists of automatic pre-heating unit (only diesel engine),
key switch, starting protection circuit, starting motor, etc. The function of this system is
starting the engine.
(3) Instruments
It mainly consists of hour meter, fuel meter, water temperature meter and
indicator lamps. They are all performance checking instruments for the forklift truck.
The instrument panel adopts Curtis internal-combustion engine meter core. The
fuel meter and water temperature meter are ten solid state bars of multicolor LED
display. The hour meter in the BAOLI instrument panel is solid state digital display with
back lamp.
Notice for operation of instrument:
a. Working circumstance: Elevation is lower than 1200 meters, working
temperature -25℃～+40℃, relative humidity is not larger than 95%.
b. Forbid wetting the meter. When washing the truck, don’t let water into the
meter, if it happens, clean it with dry cloth.
c. Don’t pull the plug of the meter and harness for the connection.
d. Forbid impacting or scratching the meter strongly.
e. When the meter works abnormally, contact with our company for maintenance.
(4) Lighting and signal device
They include all kinds of lightings, signal lamps, horns and buzzers, etc.
Headlamp: 55W
Front combination lamp (turning/signal): 21W/5W
Rear combination lamp (turning /signal/backing): 21W (red)/5W (red)/10W (white)
Warning lamp (optional): 21W