Specifications

41
and inner rim. Pay attention to the following points:
(a) Put the air valve rod in the notch of the rim and make it face outside.
(b) Make the tops of the rim mounting bolts face outside.
(c) Don’t stand near the tyre when inflating air.
(d) When the tyre pressure reaches 98KPa (1kgf/cm
2
), knock the tyre lightly to
make the inner tyre and gasket into the rim.
Fig4.1 Drive axle
1.
Housing
6.
Tapered roller bearing
11.
Rim
2.
Half-shaft
7.
Wheel hub
12.
Adjusting nut
3.
Wheel brake
8.
Tapered roller bearing
13.
Lock nut
4.
Brake drum
9.
Oil seal
5.
Oil seal
10.
Tyre