Specifications

15
of the forklift truck may fluctuate due to different operation and the influence of the
external environment.
(55) The driver feels the vibration of the forklift truck when operating and traveling
the forklift truck.. According to ISO3691 and based on EN13059 standard. The
vibration of the forklift truck fluctuates according to environment condition. In normal
working condition, the vertical direction acceleration mean value from the seat to the
operator by testing is in the following table. But the vibration frequency felt by the
driver depends on the working condition (etc. road, operation method), so the actual
vibration frequency must be determined according to environment condition when
necessary.
(56) To prevent the fire, accident or other unpredictable event, prepare the fire
extinguishers in advance and operate them according to the instructions.
Model
The noise pressure
level at the operator’s
position
The measured sound
power level
The guaranteed
sound power level
The vertical
direction
acceleration mean
value from the seat
to the operator
EN12053
EN12053
2000/14/EC
CPCD20
85 dB(A)
105 dB(A)
107 dB(A)
0.76 (m/s
2
)
CPCD25
86 dB(A)
104 dB(A)
107 dB(A)
0.72 (m/s
2
)
CPQD20
85 dB(A)
103 dB(A)
105 dB(A)
0.86 (m/s
2
)
CPQD25
85 dB(A)
103 dB(A)
105 dB(A)
0.84 (m/s
2
)
CPCD30
87 dB(A)
105 dB(A)
107 dB(A)
0.91 (m/s
2
)
CPCD35
86 dB(A)
104 dB(A)
107 dB(A)
0.84 (m/s
2
)
CPQD30
86 dB(A)
103 dB(A)
105 dB(A)
0.85 (m/s
2
)
CPQD35
87 dB(A)
104 dB(A)
105 dB(A)
0.87 (m/s
2
)
7. Caution plate
The caution plates attached on the vehicle indicates the operating method and
instructions. Before driving it, please be sure to read them thoroughly. If the caution
plate drops, stick it again. When maintaining, check if the caution plate is complete
and the writing is legible, if necessary, please replace them.
(1) Safety mark (People are forbidden to stand on or down the fork.)