Specifications

8
(3) Sling the forklift truck
(a) Only the specially trained personnel can sling the truck.
(b) Sling points should be always at the positions specified in sling nameplate.
(c) The slinging cable must be enough to hang the forklift truck.
(d) Disassembled parts of forklift truck must be slung in the appointed position.
Model
Mast (normal type)
Balance weight
Dimension
(mm)
Slinging capacity
(kg)
Dimension
(mm)
Slinging capacity
(kg)
2.0T
1890×1040×470
>7800
1135×543×950
>1200
2.5T
1890×1040×470
>7800
1135×628×950
>1600
3.0T
1935×1100×470
>7900
1135×720×955
>1800
3.5T
1935×1100×470
>7900
1135×796×998
>2200
Notice:
Dismantling and slinging the component shall not be performed without the
approval of our company. Under special circumstances, the appointed sling
position should be used. The balance weight, fork and mast of the forklift truck all
have their appointed sling position. The above-mentioned data is only for a
reference, which may be adjusted because of configuration or technology
optimization.
(4) Towing of forklift truck
(a) The towing pin is installed below the counter weight. When towing the forklift
truck, first extract the pin and fasten a steel wire, then install the pin back.
(b) When towing the forklift truck, release the hand brake lever.
(c) The towing pin only used for following situation, while the forklift truck can’t
move or while transporting the forklift truck.
(d) Fasten the towing steel wire at the appointed position.
(e) Don’t apply capacity abruptly when towing the forklift truck.
(5) Repair the broken-down forklift truck
If the forklift truck broken-down suddenly during using, drag it away and repair in
time to avoid hindering other vehicles or workers.