Specifications

15 ANI-ID - Automatic Number ID Baofeng UV-5R
Appendix B. Menu definitions 53
Key Values Notes Default value
2 CHI Chinese
0 OFF
In some versions of the firmware your options may be restricted to ON and OFF.
15 ANI-ID - Automatic Number ID
This can only be set via Computer Linked programming.
Values Notes Default value
80808
16 DTMFST - DTMF tone of transmit
code
Selects if you should send your S-CODE(DT) or ANI code with the PTT-ID.
Key Values Notes Default value
1 DT-ST S-CODE only DT+ANI
2 ANI code onlyANI-
ST
3 DT+ANI Both
0 OFF
You cannot set DTMFST while in channel/memory mode.
17 S-CODE - Signal Code
S-CODE sets your transceiver to one of the fifteen(15) group ID codes. The actual ID
codes are only settable from a computer.
Values Notes Default value
1 - 15 1
You cannot set S-CODE while in channel/memory mode.
18 SC-REV - Scanner Resume Method
Sets the behaviour of the scanner upon finding active frequencies.