User Manual

Note: ON-backlight will be always on; OFF-backlight will be always off; KEY-touch key will automatically activate the

backlight. Without any key operation, the backlight will be automatically turned off after a delay of 5 seconds.

4> Press [MENU] key to confirm;

5> Press [PTT] or [A/B] key to exit the menu mode.

6.3.5 Beep tone (BEEP) - MENU 05

If you enable this function, every time a key is pressed, you will hear a Beep tone. You can set it as follows:

1> Press [MENU] key to enter the main menu, and press the [+UP]/[-DOWN] key to enter the MENU 05.

2> Press [MENU] key again to enter the BEEP menu;

3> Press [+UP]/[-DOWN] key to select the BEEP switch, and the selection range is ON/OFF;

Note: ON-turn on the key prompt sound; OFF-turn off the key prompt sound.

4> Press [MENU] key to confirm;

5> Press [PTT] or [A/B] key to exit the menu mode.

6.3.6 VOX (VOX) - MENU 06

Your radio has 5 VOX level settings: (OFF/1~5).

This function allows hands-free conversations: just speak in the direction of the microphone and the communication will be

automatically activated.

The steps for setting up VOX voice control transmission are as follows:

1> Press [MENU] key to enter the main menu, and press the [+UP]/[-DOWN] key to enter the MENU 06.

2> Press [MENU] key again to enter the VOX menu;

3> Press [+UP]/[-DOWN] key to select the VOX switch and sensitivity, the selection range is OFF, 1~5;

Note: Level 5 low sensitivity, use under high background noise; Level 1 high sensitivity, use under low background noise.

Select ‘OFF’ will turn off the VOX function. After the VOX function is turned on, the screen will display the ’VOX‘icon.

4> Press [MENU] key to confirm;

5> Press [PTT] or [A/B] key to exit the menu mode.