Product Manual
Page 4 of 17
Intended Use
The Bannon 4400 Lb. Capacity Quick Lift Pallet Jack is designed for transportation of loads with a
level base. It should be used only on a firm and even surface, such as concrete or asphalt. The load
must be placed on evenly distributed pallets, with the ideal loading mode such that the center of
gravity of the load is at the central position of the fork. The pallet jack is easy to use and requires only
5 strokes to reach maximum height. For loads over 330 lb. the hydraulic system automatically
switches to normal operation.
Packaging Contents
Part A (1)
Part B (1)
Frame Assembly (1)
Handle (1)
Technical Specifications
Property
Specification
Capacity
4400 lb. (2000Kgs)
Fork Length
48 in. (1220mm)
Width
27 in. (685mm)
Lift Range
3 – 7-1/2 in. (75-190mm)
Guide Roller Size
2 in. (51mm)
Steering Wheel Size
7 in. (178mm)
Important Safety Information
⚠WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.