Product Manual

Page 4 of 17
Intended Use
The Bannon 5500 Lb. Capacity Multi-Directional Pallet Jack is designed for transportation of loads
with a level, attached base and may be used only on a firm and even surface, such as concrete or
asphalt. The load must be on evenly distributed pallets, with the ideal loading mode such that the
center of gravity of the load is at the central position of the fork.
Packaging Contents
Part A (1)
Frame Assembly (1)
Technical Specifications
Property
Specification
Capacity
5500 lb. (2500 kg)
Fork Length
48 in. (1220 mm)
Width
27 in. (685 mm)
Lift Range
3 8-1/2in. (75 190 mm)
Guide Roller Size
2 in. (51 mm)
Steering Wheel Size
7 in. (180 mm)
Important Safety Information
WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
WARNING