Product Manual

Page 16 of 20
Use a soft, damp cloth (water only) for cleaning, then wipe with dry cloth.
Troubleshooting
⚠WARNING
TURN OFF FAN AND BREAKER AT ELECTRICAL SUPPLY BEFORE ATTEMPING TO DO ANY
ADJUSTMENT TO THE FAN.
Failure
Possible Cause
Corrective Action
IF FAN
WOBBLES IN
MOTION
1. Blades not secured or
balanced
2. Be sure ball-to-hanger bracket
is locked in place
UNPLUG from power source.
1a. Check and re-secure screws that
connect the blades to the motor.
1b. Interchange two adjacent (side by
side) blades can redistribute the weight
and possibly retain smoother
operation.
2. Remove Canopy and adjust ball in
hanger bracket
IF FAN DOES
NOT START
Not connected or no power supply
1. Check main and branch fuses or
circuit breakers.
2. Check wire connections as
performed in step 8 or 13 of
installation. Make sure main
power is turned off.
3. If the fan still will not start, contact
a qualified electrician.
4. Do not attempt to troubleshoot
internal electrical connections
yourself.
IF FAN MAKES
EXCESSIVE
NOISE
Mechanical or electrical interference
1. Check to make sure all screws in
motor housing are snug
2. Check to make sure screws
which attach fan blades to the
motor are tight.
3. Some fans are sensitive to
signals from Solid State variable
speed controls.
DO NOT USE a Solid State variable
speed control.