Product Manual

Page 11 of 20
will allow for hands-free wiring.
 Securely tighten safety wire (1) to hanger bracket (2).
WIRING DIAGRAM
 Create a wiring connection from the housing and the motor to the remote receiver as shown
above.
 Connect using wire nuts (provided).
 Once wiring step has been completed, slide the wired remote receiver (1) in between the
mounting bracket (2) and the top of the down rod ball (3) for the down rod fans.
SECURING CANOPY
 After wiring, slide the canopy up to the mounting bracket.
 The canopy has two mating slots (1) and two mating holes (2).
 Lift the canopy allowing the two screws to slide into the mating slots.
 Rotate the canopy until both screws from the mounting bracket drop into the slot recesses.
 Tighten the screws securely.
 Install the two screws into the mating holes of the canopy and tighten to secure the canopy to the