Product Manual
Page 8 of 12
• Check the reel for correct operation by slowly pulling out the hose. A clicking noise will be heard
every half revolution of the drum.
• To latch the reel, pull out the hose and allow it to retract after hearing the first, second, or third
click.
• To unlatch, slowly pull out the hose until the clicking stops. Let the cable retract until the cable
stopper rests against the cable guide.
• If necessary, adjust the spring tension on the reel by adding or removing wraps of hose from the
spool, one wrap at a time until the desired tension is obtained. Add wraps to increase the tension.
Remove wraps to decrease tension.
After Each Use
⚠WARNING
Always hold on to the hose while rewinding to prevent the hose whipping.
• Store the hose reel in a clean, dry, and safe place.
• To avoid injury, do not allow children to play with the hose reel.
Maintenance
• Be sure the hose is in proper working order.
• Clean the hose with a cloth dipped in warm water to remove dirt or deposits and ensure correct
rewinding.
• Do not use detergents or solvents which could prove incompatible with the cable-winder
materials. Dismantling of the unit by unskilled personal could prove hazardous; the risk involved
mainly concern the preloaded springs.
Troubleshooting
Possible Cause
Corrective Action
Reel will not latch.
Contact your local supplier or a qualified
technician for service.
Reel is not retracting.
Contact your local supplier or a qualified
technician for service.