Product Manual

Page 8 of 12
• Check the reel for correct operation by slowly pulling out the hose. A clicking noise will be heard
every half revolution of the drum.
• To latch the reel, pull out the hose and allow it to retract after hearing the first, second, or third
click.
• To unlatch, slowly pull out the hose until the clicking stops. Then let the cable retract until the
cable stopper rests against the cable guide.
• If necessary, adjust the spring tension on the reel by adding or removing wraps of hose from the
spool, one wrap at a time until the desired tension is obtained. Add wraps to increase tension and
remove wraps to decrease tension.
After Each Use
⚠WARNING
 Always hold on to the hose while rewinding to prevent the hose whipping.
 Store the hose reel in a clean, dry, and safe place.
 To avoid injury, do not allow children to play with the hose reel.
Maintenance
 Be sure the hose is in proper working order.
 Clean the hose with a cloth dipped in warm water to remove dirt or deposits and ensure correct
rewinding.
 Do not use detergents or solvents which could prove incompatible with cable-winder materials.
Dismantling of the unit by unskilled personal could prove hazardous; the risk involved mainly
concern the preloaded springs.
Troubleshooting
Possible Cause
Corrective Action
Reel will not latch.
Contact your local supplier or a qualified
technician for service.
Reel is not retracting.
Contact your local supplier or a qualified
technician for service.