Product Manual

Page 15 of 23
⚠WARNING
 Do not adjust the legs to different heights.
3. Once the desired height has been reached, reinsert height pins and secure in place with R-pins.
Before Operating Hoist
1. After desired height has been reached, secure with R-Pins, REMOVE THE ROD(15C)
before operating Hoist.
2. Familiarize yourself with all operating controls of the hoist and with the operation(s) to be
performed. Instructions include, the warnings on the hoist, and the safety and operating
instructions portion of this manual.
⚠WARNING
 TO PREVENT SERIOUS INJURY FROM HOIST FAILURE: Do not use damaged equipment. If
adjustments or repairs are necessary, or any defects are known, have the problem corrected
before further use.
3. Do not operate a hoist with an out-of-order sign.
4. Only a qualified technician should perform maintenance to the hoist.
5. Designate a work area that is clean and well-lit. The work area must not allow access by
children or pets to prevent distraction and injury.
6. There must not be objects, such as utility lines, nearby that will present a hazard while working.
7. Lock casters before lifting a load.