Product Manual

Page 6 of 15
 Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
 Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
 Do not abuse the power cord. Never use the power cord to carry the tools or pull the plug from an
outlet. Keep the power cord away from heat, oil, sharp edges, or moving parts. Replace damaged
power cords immediately. Damaged power cords increase the risk of electric shock.
⚠CAUTION
HOIST USE AND CARE
 Do not force the product. Products do a better and safer job when used in the manner for which
they are designed. Plan your work, and use the correct product for the job.
 Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
 Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.
 Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
 Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
 Keep guards in place and in working order. Never operate the product without the guards in place.
 Do not leave the tool running unattended.
Specific Operation Warnings
⚠WARNING
 Improper use can cause risk of fire, electric shock, or serious personal injury.
 Do not lift more than the rated load capacity.
 Do not ride or handle the moving load.
 Not for lifting people or animals.
 Do not work, walk, or stand under an operating hoist.
 Ensure the load is centered below the hoist before use.