Product Manual

Page 4 of 15

Intended Use

The Bannon Electric Hoist can operate on standard domestic power. The wire rope comes with a

safety-latch weight hook. It operates on a household power source. When the rope touches the limit

arm, hoisting automatically stops

Technical Specifications

Property

Specification

Capacity (lb.)

660

Wire Rope (ft.)

Voltage (V)

110

Power Cord (ft.)

22.9

Important Safety Information

⚠WARNING

 Read and understand all instructions. Failure to follow all instructions may result in serious injury

or property damage.

 The warnings, cautions, and instructions in this manual cannot cover all possible conditions or

situations that could occur. Exercise common sense and caution when using this hoist. Always be

aware of the environment and ensure that the tool is used in a safe and responsible manner.

 Do not allow persons to operate or assemble the hoist until they have read this manual and have

developed a thorough understanding of how it works.

 Do not modify this hoist in any way. Unauthorized modification may impair the function and/or

safety and could affect the life of the product. There are specific applications for which the product

was designed.

 Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger

industrial equipment. There are certain applications for which this equipment was designed. It will

do the job better and more safely at the capacity for which it was intended. DO NOT use this

equipment for a purpose for which it was not intended.

 Industrial or commercial applications must follow OSHA requirements.

⚠WARNING

 This product contains lead, a chemical known to the State of California to cause cancer and birth

defects or other reproductive harm. Wash your hands after handling.

⚠WARNING

WORK AREA SAFETY

 Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.

Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas

may put you dangerously close to other cutting tools and rotating parts.