Product Manual
Page 8 of 24
Reference
Subassembly
5
Integrated extension
6
Support base for power drill
7
Wooden platform
8
Side foot
9
Middle foot
10
Balance bar with wheels
11
1
3/4’’
screw
12
2
1/4’’
screw
13
2
5/8’’
screw
14
3
1/8’’
screw
15
Nut
Assembly Instructions
1. Attach the balance bar with wheels (10) to the main body (4) with the two 3
1/8
" screws (14) and
nuts (15). Use a 1/2" flat wrench and a 1/4" hex wrench.
2. Attach the side (8) and middle feet (9) to the main body (4) with the six 2
1/4
" screws (12) and
nuts (15). Use a 1/2" flat wrench and a 1/4" hex wrench.
Position the side feet with the brake (8) on the same side as the security and main brake levers. The
middle foot (9) is the shortest foot. The middle foot nuts have to be firmly tightened because the foot
doesn’t rotate like the side feet (8).
3. Open the 2 side feet (8) and insert the removable pin in the base frame hole following the
selected configuration :