Product Manual

Page 4 of 24
Intended Use
The Bannon 175-Lb. Drywall and Panel Hoist can lift plasterboard in every position: horizontal (ceiling
installation), angled (sloping ceiling installation), and vertical (wall installation). It’s the only panel and
drywall hoist that can be operated manually and automatically with power drill assistance. Its rack and
pinion system allows you to lift plasterboards with less effort than others panel and drywall hoists. It
has an innovative braking system with handles (main brake and safety brake) to lower the panel
quickly with control.
Packaging Contents
 Arm (2)
 Support base for power drill (1)
 1
3/4
" screw (2)
 Arm pipe (2)
 Wooden platform (1)
 2
1/4
" screw (6)
 Top rack (1)
 Side foot (2)
 2
5/8
" screw (1)
 Main body (1)
 Integrated extension (1)
 Middle foot (1)
 Balance bar with 2 wheels (1)
 3
1/8
" screw (2)
 Nut (11)
Technical Specifications
Property
Specification
Maximum loading weight
175 lb.
Maximum board dimensions
4’ x 14’
Minimum board dimensions
0.49’ x 1.97’
Maximum height with extension part
14’
Maximum height without extension part
11.48’
Minimum height
5.28’
Maximum vertical lifting height with 8.2 Ft height board
20.51’
Board loading height (without extension)
2.76’
Minimum width in moving/storage position
24
3/4
"
Total gross weight
117 lb.
Important Safety Information
⚠WARNING
 Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
 The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
 Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
 Do not modify this product in any way. Unauthorized modification may impair the function and/or