User Guide

Quick Start Guide
Important: Read the following instructions before operating the light. Please download the complete WLA-2 Area
Light technical documentation, available in multiple languages, from www.bannerengineering.com for details on
the proper use, applications, Warnings, and installation instructions of this device.
Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde
www.bannerengineering.com toda la documentación técnica de los WLA-2 Area Light, disponibles en múltiples
idiomas, para detalles del uso adecuado, aplicaciones, advertencias, y las instrucciones de instalación de estos
dispositivos.
Important: Lisez les instructions suivantes avant d'utiliser le luminaire. Veuillez télécharger la documentation
technique complète des WLA-2 Area Light sur notre site www.bannerengineering.com pour les détails sur leur
utilisation correcte, les applications, les notes de sécurité et les instructions de montage.
Models
Standard models shown. Contact factory for other options.
Family
WLA-2
Q = Integral 4-pin M12 QD
Q
Connector
W = Daylight White
WW = Warm White **
W
Color
Array Size
105x180
105x180
190x180
275x180
360x180
Lensing *
Blank = No lenses
L11 = ± 11 degree lenses
L30 = ± 30 degree lenses
Control
Blank = High/Low/Off
PWM = Pulse Width Modulation
* No lens option on encapsulated or diffuse window models
** No warm white option on encapsulated models
Window
D
Blank = Clear
D = Diffuse
E = Encapsulated
Wiring Diagram
Male Pin Wire Color Connection
1
4
3
2
1 Brown 12 V DC to 30 V DC
3 Blue DC common
4 Black
High/Low/Off Models:
Connect to 12 V DC to 30 V DC for 50% maximum intensity. For maximum
intensity, leave the black wire floating or connected to common.
PWM Models:
Pulse width modulation (PWM) input. For maximum intensity, leave the black wire
floating or connected to common. Connecting to 12 V DC to 30 V DC causes the
LEDs to shut off.
2 White Not used
Specifications
Supply Voltage
12 V DC to 30 V DC
Use only with suitable Class 2 power supply (UL) or SELV power supply
(CE).
See electrical characteristics on product label
LED Lifetime
Lumen Maintenance - L
70
When operating within specifications, output will decrease less than 30%
after 70,000 hours.
WLA-2 LED Area Light
Original Document
231333 Rev. B
5 December 2022
231333