Owner manual

Convergent Mode Models
CONVERGENT
VISIBLE RED
CONVERGENT
Visible Red or Infrared; see below
Models Range Cable* Supply Voltage Output Type
Visible Red 650 nm
SM912CV
38 mm (1.5")
Spot Size at Focus:
1.5 mm (0.06")
2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM912CVQD 4-Pin Mini QD
SM2A912CV 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-Wire
SM2A912CVQD 3-Pin Mini QD
Infrared 880 nm
SM912C
38 mm (1.5")
2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM912CQD 4-Pin Mini QD
SM2A912C 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-Wire
SM2A912CQD 3-Pin Mini QD
Glass Fiber Optic Individual Emitter or Receiver Models
GLASS FIBER
TWO SENSORS
Infrared, 880 nm
Use where the separation between emitting and receiving fibers is more than a few feet, or where it is inconvenient to run both fibers from
a single sensor. Watertight o-ring-sealed sensor/fiber interface.
Models Range Cable* Supply Voltage Output Type
SMA91EF
Range varies with fi-
ber used
2 m (6.5')
10-250V ac/dc –
SMA91EFQD 3-Pin Mini QD
SM91RF 2 m (6.5')
10-30V dc Bipolar NPN/PNP
SM91RFQD 4-Pin Mini QD
SM2A91RF 2 m (6.5')
24-250V ac SPST SCR Solid-state 2-Wire
SM2A91RFQD 3-Pin Mini QD
* 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SMA91EF W/30).
A model with a QD connector requires a mating cable; see Quick-Disconnect Cables on page 10.
VALU-BEAM
® 912 Series
P/N 03467_web
Rev. F
www.bannerengineering.com - tel: [phone]