User guide

ManualsBrandsBanner ManualsSensorsU-GAGE Q45U Series—Analog

5-Pin Threaded M12/Euro-Style Cordsets with Shield

Model Length Style Dimensions Pinout

MQDEC2-506RA 1.83 m (6 ft)

Right-Angle

32 Typ.

[1.26"]

30 Typ.

[1.18"]

ø 14.5 [0.57"]

M12 x 1

MQDEC2-515RA 4.57 m (15 ft)

MQDEC2-530RA 9.14 m (30 ft)

MQDEC2-550RA 15.2 m (50 ft)

SMB30S

• Swivel bracket with 30 mm

mounting hole for sensor

• Adjustable captive swivel ball

• Black reinforced thermoplastic

polyester

• Stainless steel mounting and

swivel locking hardware inclu-

ded

63.5 mm

[2.5”]

50.8 mm

[2”]

M5 x 0.8 x 30 mm

Screw (2)

Not Shown:

(2) M5 x 0.8 x 60 mm

screws are supplied for

clamping bracket together

43.2 mm

[1.7”]

25.4 mm

[1”]

82.5 mm

[3.25”]

12.2 mm

[0.48”]

SMB30C

• 30 mm split clamp, black PBT

bracket

• Stainless steel mounting hard-

ware included

• Mounting hole for 30 mm sen-

sor

Hole center spacing: A=ø 45

Hole size: B=ø 27.2

SMB30MM

• 12-ga. stainless steel bracket

with curved mounting slots for

versatile orientation

• Clearance for M6 (¼ in) hard-

ware

• Mounting hole for 30 mm sen-

sor

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of

shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned

to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse,

abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (IN-

CLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND

WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL

BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPEN-

SES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY

PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WAR-

RANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or

liabilities relating to any product previously manufactured by Banner Engineering Corp.

Q45U Ultrasonic Sensors with Analog Outputs (Short Range)