User guide
Banner Engineering Corp.•Minneapolis,MNU.S.A
www.bannerengineering.com•Tel:763.544.3164
6 P/N 129320 rev. D
SureCross™ DX80K Wireless Configured FlexPower™ Kit
Specifications
General
Power
Gateway:+10to30Vdc(ForEuropeanapplications:+10to24Vdc,±10%)
Node:+3.6to5.5Vdclowpoweroption
Power Consumption
Less than 1.4 W (60 mA) at 24V dc
Mounting
#10orM5(M5hardwareincluded)
M5FastenersMax.TighteningTorque
0.56N•m(5in•lbf)
Case Material
Polycarbonate
Weight
0.26kg(0.57lb.)
Indicators
Two LED, bi-color
Switches
Two Push Buttons
Display
Six Character LCD
External Cable Glands
FourPG-7type,One1/2-inchNPTtype
Cable Glands, Max. Tightening Torque
0.56N•m(5in•lbf)
* ForEuropeanapplications,powertheDX80fromaLimitedPowerSourceasdenedinEN60950-1.
Radio
Range*
900 MHz:Upto4.8kilometers(3miles)
2.4 GHz: Up to 3.2 kilometers (2 miles)
Transmit Power
900 MHz: 21 dBm Conducted
2.4 GHz: 18 dBm Conducted, ≤ 20 dBm EIRP
Spread Spectrum Technology
FHSS (Frequency Hopping Spread Spectrum)
Antenna Connector
Ext.ReversePolaritySMA,50Ohms
Antenna Max. Tightening Torque
0.45N•m(4in•lbf)
Link Timeout
64 seconds
*Withthestandard2dBantenna.High-gainantennasareavailable,buttherangedependsontheenvironmentandlineofsight.Todeterminetherangeofyourwireless
network, perform a Site Survey.
Many parameters are configurable. The values in the tables represent factory defaults unless otherwise noted.
Inputs
Discrete Inputs (Node)
Two Sinking
Discrete Input Rating
3 mA max current at 30V dc
Discrete Input 1,2 Sample Rate
62 milliseconds
Discrete Input 1,2 Report Rate
On Change of State
Discrete Input ON Condition
Lessthan0.7V
Discrete Input OFF Condition
Greater than 2V or Open
Analog Inputs
Two, 0 to 20 mA
Switched Power for Analog Input 1
15Vfor500milliseconds
Analog Input 1 Sample Rate
15minutes(switchselectable)
Analog Input 1 Report Rate
15minutes(switchselectable)
Analog Input 2 Sample Rate
1 seconds
Analog Input 2 Report Rate
15secondsorOnChangeofState(1%changeinvalue)
Accuracy
0.1%offullscale+0.01%per°C