Owner manual

Host System

Gateway

Node 1

Node 2

9.5 Serial Communication Configuration for DX83s

The DX83 Ethernet Bridge uses jumpers to select between RS-485 and RS-232 communications.

Install the four jumpers across the two top rows of pins for

RS-485 and across the bottom two rows of pins for RS-232.

Communication pins

9.6 Restoring Factory Default Settings

Restoring the factory default settings resets the settings for the IP address, the root login and root password, the HTTP

port setting, and a few other communication settings.

Restoring the factory default settings resets the settings for:

Parameter

Default Setting

IP Address 192.168.0.1

Root Login root

Root Password sxi

HTTP Port 80

Modbus Server Port 502

Telnet Port 23

EtherNet/IP Protocol Disabled

Host Controller Systems