Owner's manual

Wire No. Wire Color 10 to 30V dc Powered Nodes Battery Powered Nodes
1
2
3
4
5
1 Brown 10 to 30V dc
2 White
3 Blue dc common (GND) dc common (GND)
4 Black
5 Gray 3.6 to 5.5V dc
DX80...C Wiring
Wiring power to the DX80...C models varies depending the power requirements of the model. Connecting dc power to the communication
pins (Tx/Rx) causes permanent damage. For FlexPower devices, do not apply more than 5.5V to the B+ terminal.
Terminal Label Gateway, DX85 10 to 30V dc Powered Nodes Battery Powered Nodes
V+ 10 to 30V dc 10 to 30V dc
Tx/+ RS485 / D1 / B / +
V- dc common (GND) dc common (GND) dc common (GND)
Rx/- RS485 / D0 / A / -
B+ 3.6 to 5.5V dc
Terminal Block (IP67 Housing)
For the IP67 housing models, PWR in the wiring diagram refers to SP1 or SP2 on the wiring board.
SP2
CMB
DO2
DO4
GND
DI1
DI4
SP1
CMA
DO1
DO3
GND
DI1
DI3
GND GND
CMx. Serial interface connection. For non-serial interface models, do not make
any wiring connections to these terminals.
DIx. Discrete IN x.
DOx. Discrete OUT x.
GND. Ground/dc common connection.
SPx. Switch Power. Provides variable power sources for external devices.
Ignore alternate labeling referring to other models that use this board.
Terminal Block (IP20 Housing)
For the DX8x...C models, PWR in the wiring diagram refers to V+ on the wiring board and GND in the wiring diagram refers to V- on the
wiring board. Ignore alternate labeling referring to other models that use this board.
FlexPower Discrete Models FlexPower Serial Interface Models FlexPower Counter Models
B+. 3.6 to 5.5V dc (for battery powered
models only).
DIx. Discrete IN x.
DOx. Discrete OUT x.
RX/-. Serial comms line for Gateways and
DX85s only. No connection for Nodes.
B+. 3.6 to 5.5V dc (for battery powered models
only).
CMx. Serial interface connection. For non-seri-
al interface models, do not make any wiring
connections to these terminals.
DIx. Discrete IN x.
DOx. Discrete OUT x.
B+. 3.6 to 5.5V dc (for battery powered
models only).
CIx. Counter IN x.
DIx. Discrete IN x.
DOx. Discrete OUT x.
RX/-. Serial comms line for Gateways and
DX85s only. No connection for Nodes.
SureCross DX80 FlexPower Node
4 www.bannerengineering.com - tel: [phone] P/N 136328 Rev. F