Instruction Manual

ManualsBrandsBanner ManualsEquipmentSureCross DX80 Wireless Networks

Banner Engineering Corp.•Minneapolis,MNU.S.A

www.bannerengineering.com•Tel:763.544.3164

4 P/N 129322 rev. E

SureCross™ DX80K Wireless Conﬁgured FlexPower™ Kit

Analog Conﬁguration

For analog conﬁguration, DIP switch 2 is in the OFF position. Analog conﬁguration has analog IN 1 linked to switch power 1 (SP1) and is

programmable using switches four through eight. Analog input 2 uses the report rate and sample intervals listed in the table below. Discrete

inputs 1 and 2 are also active in this conﬁguration and the input types are deﬁned using switch 3. Two sinking discrete outputs are active for

this conﬁguration.

Analog Conﬁguration, Switch 2 OFF DIP Switches

Descriptions 3 4 5 6 7 8

Discrete Sinking (NPN) OFF*

Discrete Sourcing (PNP) ON

Booster 10V (Analog IN 1) OFF*

Booster15V(AnalogIN1) ON

Warm-up Time 10 milliseconds OFF*

Warm-upTime500milliseconds ON

Sample/Report Rate 1 second OFF OFF OFF

Sample/Report Rate 2 seconds OFF OFF ON

Sample/Report Rate 4 seconds OFF ON OFF

Sample/Report Rate 16 seconds OFF ON ON

Sample/Report Rate 64 seconds ON OFF OFF

Sample/ReportRate5minutes ON OFF ON

Host conﬁgured (override switches) ON ON OFF

Sample/ReportRate15minutes ON ON ON

Analog IN 2, Discrete 1, and Discrete 2 are not powered from switched power terminals. In this conﬁguration, SP2 is disabled. If you need SP2, contact the factory.

Discrete Conﬁguration (default conﬁguration)

The discrete conﬁguration matches the switch power outputs (SP1, SP2) with the discrete inputs. The analog inputs are disabled. The discrete

conﬁguration is selected when switch 2 is in the ON position. Two sinking discrete outputs are active for this conﬁguration.

Discrete Conﬁguration, Switch 2 ON DIP Switches

Descriptions 3 4 5 6 7 8

Discrete Sinking (NPN) OFF*

Discrete Sourcing (PNP) ON

Booster5V OFF*

Booster 10V ON

Warm-up Time 4 milliseconds OFF*

Warm-up Time 10 milliseconds ON

Sample/ReportRate62.5milliseconds OFF OFF OFF

Sample/ReportRate125milliseconds OFF OFF ON

Sample/ReportRate250milliseconds* OFF* ON* OFF*

Sample/ReportRate500milliseconds OFF ON ON

Sample/Report Rate 1 second ON OFF OFF

Sample/Report Rate 2 seconds ON OFF ON

Host conﬁgured (override switches) ON ON OFF

Sample/Report Rate 16 seconds ON ON ON

Notes:DiscreteIN1usesswitchedpower1(SP1).DiscreteIN2usesswitchedpower2(SP2).Analoginputs1and2aredisabled.(DefaultcongurationforthePE1kits)