User Manual
Banner Engineering Corp.•Minneapolis,MNU.S.A
www.bannerengineering.com•Tel:763.544.3164
6 P/N 136440 rev. C
SureCross™ DX80K Wireless Configured Kit
It is Banner Engineering’s intent to fully comply with all national and regional regulations regarding radio frequency emissions. Customers who want to re-export this
product to a country other than that to which it was sold must ensure that the device is approved in the destination country. A list of approved countries appears in the
SureCross DX80 Wireless Product Manual, in the Agency Certifications section. Consult with Banner Engineering if the destination country is not on this list.
Certifications, Radio
900 MHz Models
FCCIDTGUDX80:ThisdevicecomplieswithFCCPart15,SubpartC,15.247
IC:7044A-DX8009
2.4 GHz Models
FCCIDUE300DX80-2400:ThisdevicecomplieswithFCCPart15,SubpartC,15.247
ETSI/EN:InaccordancewithEN300328:V1.7.1(2006-05)
IC:7044A-DX8024
Environmental
Environmental Rating*
IECIP67;NEMA6
Operating Temperature**
−40to+85°C(Electronics);−20to+80°C(LCD)
Operating Humidity
95%max.relative(non-condensing)
Radiated Immunity
10V/m,80-2700MHz(EN61000-6-2)
Shock and Vibration
IEC68-2-6andIEC68-2-7
Shock: 30g, 11 millisecond half sine wave, 18 shocks
Vibration:0.5mmp-p,10to60Hz
* PleaserefertotheSureCross™DX80WirelessI/ONetworkproductmanual,Bannerp/n132607,forinstallationandwaterproonginstructions.
** Operating the devices at the maximum operating conditions for extended periods can shorten the life of the device.