Manual
2.5.3 DX80...C Wiring
Wiring power to the DX80...C models varies depending the power requirements of the model. Connecting dc power to the
communication pins (Tx/Rx) causes permanent damage. For FlexPower devices, do not apply more than 5.5 V to the B+
terminal.
Terminal
Label
Gateway, DX85 10 to 30 V dc Powered Nodes Battery Powered Nodes
V+ 10 to 30 V dc 10 to 30 V dc
Tx/+ RS485 / D1 / B / +
V- dc common (GND) dc common (GND) dc common (GND)
Rx/- RS485 / D0 / A / -
B+ 3.6 to 5.5 V dc
2.5.4 Industrial Ethernet Wiring
Use the 4-pin industrial Ethernet connection to connect the radio network to an Ethernet-based host system.
Wire No.
Wire Color Description
1 White/Orange +Tx
2 White/Blue +Rx
3 Orange -Tx
4 Blue -Rx
2.6 Dimensions
The DX80, DX83, and DX70 models all share the same housing and mounting hole dimensions.
2.6.1 Gateways and Nodes
65.0
[2.56”]
65.0
[2.56”]
80.3
[3.16”]
80.8
[3.18”]
60
[2.36”]
120
[4.72”]
127
[5”]
19
[0.75”]
30.65
[1.21”]
22.2
[0.875”]
7.9
[0.31”]
7.65
[0.30”]
14.67
[0.578”]
SureCross Wireless I/O Networks
11