User Manual

Banner Engineering Corp.•Minneapolis,MNU.S.A
www.bannerengineering.com•Tel:763.544.3164
2 P/N 129311 rev. D
SureCross™ DX80K Wireless Configured Kit
Hookup Diagrams
For additional information, including
installation and setup, weatherproofing,
device menu maps, troubleshooting, and
a list of accessories, please refer to the
SureCross™ DX80 Wireless I/O Network
productmanual,Bannerp/n132607.
I/O
Point
Terminal Block
Label
DX80 Node DX80 Node Terminal Block
Label
I/O
Point
Node 1
1 DI1 Discrete IN 1 Discrete OUT 1 DO1 9
Node 2
2 DI2 Discrete IN 2 Discrete OUT 2 DO2 10
3 DI3 Discrete IN 3 Discrete OUT 1 DO1 9
Node 3
4 DI4 Discrete IN 4 Discrete OUT 2 DO2 10
Node 1
9 DO1 Discrete OUT 1 Discrete IN 1 DI1 1
Node 2
10 DO2 Discrete OUT 2 Discrete IN 2 DI2 2
11 DO3 Discrete OUT 3 Discrete IN 1 DI1 1
Node 3
12 DO4 Discrete OUT 4 Discrete IN 2 DI2 2
Configured input/output mapping
These are the I/O points as displayed on the device LCD. Any I/O points not shown in the chart are not enabled for this kit.
Node 1
Node 2
Gateway as I/O
Repeater
Inputs 1-2
Outputs 1-2
Outputs 1-2
Node 3
Inputs 1-2
Inputs 3-4
Outputs 3-4
Outputs 1-2
Inputs 1-2
PWR
GND
DO4
DI4
PWR
GND
DO2
DI2
PWR
GND
DO3
DI3
PWR
GND
DO1
DI1
DIx
PWR
DOx
GND
5-pin Euro-style Hookup (RS-485)
Wire Color Gateway 10–30V dc Node
1 Brown +10 to 30V dc Input +10 to 30V dc Input
2 White RS485/D1/B/+
3 Blue dc common (GND) dc common (GND)
4 Black RS485/D0/A/−
5 Gray Comms grnd
* Connecting dc power to the communication pins will cause permanent damage.
Sourcing Input Wiring Sourcing Outout Wiring