Owner's manual

Banner Engineering Corp.•Minneapolis,MNU.S.A
www.bannerengineering.com•Tel:763.544.3164
2 P/N 129317 rev. D
SureCross™ DX80K Wireless Configured Kit
Hookup Diagrams
For additional information, including installation
and setup, weatherproofing, device menu maps,
troubleshooting, and a list of accessories, please
refer to the SureCross™ DX80 Wireless I/O
Network product manual, Banner part number
132607.
I/O
Point
Terminal Block
Label
DX80 Node DX80 Node Terminal Block
Label
I/O
Point
Node 1
1 DI1 Discrete IN 1 Discrete OUT 1 DO1 9 Node 2
2 DI2 Discrete IN 2 Discrete OUT 1 DO1 9 Node 3
5 AI1 Analog IN 1 Analog OUT 1 AO1 13 Node 2
6 AI2 Analog IN 2 Analog OUT 1 AO1 13 Node 3
Node 1
9 DO1 Discrete OUT 1 Discrete IN 1 DI1 1 Node 2
10 DO2 Discrete OUT 2 Discrete IN 1 DI1 1 Node 3
13 AO1 Analog OUT 1 Analog IN 1 AI1 5 Node 2
14 AO2 Analog OUT 2 Analog IN 1 AI1 5 Node 3
Configured input/output mapping
These are the I/O points as displayed on the device LCD. Any I/O points not shown in the chart are not enabled for this kit.
Node 1
Node 2
Gateway as I/O
Repeater
Inputs D1, A1
Outputs D1, A1
Outputs D1, A1
Node 3
Inputs D1, A1
Inputs D2, A2
Outputs D2, A2
Outputs D1, A1
Inputs D1, A1
Sourcing Input Wiring Sourcing Outout Wiring
DIx
PWR
PWR
GND
AO2
AI2
PWR
GND
DO2
DI2
PWR
GND
AO1
AI1
PWR
GND
DO1
DI1
DOx
GND
5-pin Euro-style Hookup (RS-485)
Wire Color Gateway 10–30V dc Node
1 Brown +10 to 30V dc Input +10 to 30V dc Input
2 White RS485/D1/B/+
3 Blue dc common (GND) dc common (GND)
4 Black RS485/D0/A/−
5 Gray Comms grnd
* Connecting dc power to the communication pins will cause permanent damage.