Manual

Gateway with Multiple Nodes (DX80)
In this configuration, the Gateway is the master of the wireless network.
Configure this network using the User Configuration Tool (UCT) and RS-485 to USB adapter cable. The UCT is used to map
inputs and outputs between Nodes and Gateways.
1
2
2
2
Item
Model No. Description
1 DX80G... DX80 or DX80 Performance Gateway
2 DX80N... DX80 or DX80 Performance Node
81398 User Configuration Tool (free to download from the Wireless Products section of
Banner Engineering's website)
BWA-HW-006 RS-485 to USB adapter cable (not shown)
System Layouts
2 www.bannerengineering.com - tel: [phone] Datasheet