Instruction Manual
Banner Engineering Corp.•Minneapolis,MNU.S.A
www.bannerengineering.com•Tel:763.544.3164
6 P/N 135607 rev. B
SureCross™ DX80K Wireless Configured Kit
It is Banner Engineering’s intent to fully comply with all national and regional regulations regarding radio frequency emissions. Customers who want to re-export this
product to a country other than that to which it was sold must ensure that the device is approved in the destination country. A list of approved countries appears in the
SureCross DX80 Wireless Product Manual, in the Agency Certifications section. Consult with Banner Engineering if the destination country is not on this list.
Certifications, Radio
900 MHz Models
FCCIDTGUDX80:ThisdevicecomplieswithFCCPart15,SubpartC,15.247
IC:7044A-DX8009
2.4 GHz Models
FCCIDUE300DX80-2400:ThisdevicecomplieswithFCCPart15,SubpartC,15.247
ETSI/EN:InaccordancewithEN300328:V1.7.1(2006-05)
IC:7044A-DX8024
Environmental
Environmental Rating*
IEC IP67; NEMA 6
Operating Temperature**
−40 to +85° C (Electronics); −20 to +80° C (LCD)
Operating Humidity
95%max.relative(non-condensing)
Radiated Immunity
10 V/m, 80-2700 MHz (EN61000-6-2)
Shock and Vibration
IEC 68-2-6 and IEC 68-2-7
Shock:30g,11millisecondhalfsinewave,18shocks
Vibration:0.5mmp-p,10to60Hz
* Please refer to the SureCross™ DX80 Wireless I/O Network product manual, Banner p/n 132607, for installation and waterproofing instructions.
** Operating the devices at the maximum operating conditions for extended periods can shorten the life of the device.
Outputs
Discrete Outputs
Gateway: Six Sourcing
Node: One Sourcing
Discrete Output Rating
100 mA max current at 30V dc
ON-State Saturation: Less than 3V at 100 mA
OFF-state Leakage: Less than 10 µA
Discrete Output Update Rate
125 milliseconds
Discrete Output ON Condition
Supply minus 2V
Discrete Output OFF Condition
Less than 2V
Discrete Output State Following Timeout
De-energized (OFF)