Instruction Manual

P/N 135607 rev. B 5
Banner Engineering Corp.•Minneapolis,MNU.S.A
www.bannerengineering.com•Tel:763.544.3164
SureCross™ DX80K Wireless Configured Kit
Specifications
General
Power*
+10 to 30V dc
ForEuropeanapplications:+10to24Vdc,±10%
Power Consumption
Less than 1.4 W (60 mA) at 24V dc
Mounting
#10 or M5 (M5 hardware included)
M5 Fasteners Max. Tightening Torque
0.56N•m(5in•lbf)
Case Material
Polycarbonate
Weight
0.26 kg (0.57 lb.)
Indicators
Two LED, bi-color
Switches
Two Push Buttons
Display
Six Character LCD
External Cable Glands
Four PG-7 type, One 1/2 NPT type
Cable Glands Max. Tightening Torque
0.56N•m(5in•lbf)
* For European applications, power the DX80 from a Limited Power Source as defined in EN 60950-1.
Radio
Range*
900 MHz:Upto4.8kilometers(3miles)
2.4 GHz: Up to 3.2 kilometers (2 miles)
Transmit Power
900 MHz: 21 dBm Conducted
2.4 GHz: 18 dBm Conducted, ≤ 20 dBm EIRP
Spread Spectrum Technology
FHSS (Frequency Hopping Spread Spectrum)
Antenna Connector
Ext. Reverse Polarity SMA, 50 Ohms
Antenna Max. Tightening Torque
0.45N•m(4in•lbf)
Link Timeout
8 seconds
* With the standard 2 dB antenna. High-gain antennas are available, but the range depends on the environment and line of sight. To determine the range of your wireless
network, perform a Site Survey.
Many parameters are configurable. The values in the tables represent factory defaults unless otherwise noted.
Inputs
Discrete Inputs
Gateway: Six Sourcing
Node: One Sourcing
Discrete Input Rating
3 mA max current at 30V dc
Discrete Input Sample Rate
125 milliseconds
Discrete Input Report Rate
On Change of State
Discrete Input ON Condition
Greater than 8V
Discrete Input OFF Condition
Less than 5V