Instruction Manual

ManualsBrandsBanner ManualsEquipmentSM30 High-Power Series

SM30 Series 30 mm Barrel Sensor

Opposed-Mode Infrared Photoelectric Sensors for Especially Demanding Applications

Printed in USA Apr 2013 P/N 03541 Rev. E

• Stainless steel or plastic barrel models

• Very high excess gain; 150 m (500 ft) sensing range; 880 nm Infrared LED

• Positive sealing eliminates even capillary leakage; lens is quad-ring sealed; exceeds

NEMA 6P (IP67) ratings – ideal for equipment wash-down environments

• EZ-BEAM

technology provides reliable sensing without the need for adjustment

• Modulation frequency “A” is standard; frequencies “B” and “C” also available for

preventing crosstalk in multiple-sensor applications (emitter and opposed receiver

frequencies must match)

• AC- and DC-operated receiver models available; emitters feature Universal voltage

• Range for all models: 150 m (500 ft). See page 3 for performance curves.

* Any emitter and receiver shown here can be used together, if they have the same modulation frequency.

** Standard 2 m (6.5 ft) cable and integral QD models are listed. A model with a QD connector requires a mating cable; see page 4. To order the 9 m (30 ft) cable: add

suffix “W/30” following the Frequency suffix of any cable model (e.g., SM30PRLBW/30).

† AC models with QD require SM30CC model cables; see page 4.

Modulation Frequency*

Housing Cable**

Supply

Power

Output Type

A B C

Emitter Models

SMA30PEL SMA30PELB SMA30PELC

Plastic

2 m (6.5') 2-wire Cable

Universal:

12 to 240V ac,

10 to 30V dc

–

SMA30PELQD SMA30PELQDB SMA30PELQDC 3-pin Mini-style QD

†

SMA30SEL SMA30SELB SMA30SELC

Stainless

Steel

2 m (6.5') 3-wire Cable

SMA30SELQD SMA30SELQDB SMA30SELQDC 3-pin Mini-style QD

†

DC Receivers

SM30PRL SM30PRLB SM30PRLC

Plastic

2 m (6.5') 4-wire Cable

10 to 30V dc

Bi-Modal™

NPN or PNP

SM30PRLQD SM30PRLQDB SM30PRLQDC 4-pin Mini-style QD

SM30SRL SM30SRLB SM30SRLC

Stainless

Steel

2 m (6.5') 4-wire Cable

SM30SRLQD SM30SRLQDB SM30SRLQDC 4-pin Mini-style QD

AC Receivers

SM2A30PRL SM2A30PRLB SM2A30PRLC

Plastic

2 m (6.5') 2-wire Cable

24 to 240V ac

SPST

Solid-state,

L.O.

SM2A30PRLQD SM2A30PRLQDB SM2A30PRLQDC 3-pin Mini-style QD

†

SM2A30SRL SM2A30SRLB SM2A30SRLC

Stainless

Steel

2 m (6.5') 3-wire Cable

SM2A30SRLQD SM2A30SRLQDB SM2A30SRLQDC 3-pin Mini-style QD

†

SM2A30PRLNC SM2A30PRLNCB SM2A30PRLNCC

Plastic

2 m (6.5') 2-wire Cable

SPST

Solid-state,

D.O.

SM2A30PRLNCQD SM2A30PRLNCQDB SM2A30PRLNCQDC 3-pin Mini-style QD

†

SM2A30SRLNC SM2A30SRLNCB SM2A30SRLNCC

Stainless

Steel

2 m (6.5') 3-wire Cable

SM2A30SRLNCQD SM2A30SRLNCQDB SM2A30SRLNCQDC 3-pin Mini-style QD

†

WARNING . . . Not To Be Used for Personnel Protection

Never use these products for personnel protection. Doing so could lead to serious injury or death. These devices do NOT include the self-checking redundant circuitry

necessary to allow their use in personnel safety applications. A device failure or malfunction can cause either an energized or de-energized output condition. Consult your

current Banner Safety Products catalog for safety products that meet OSHA, ANSI, and IEC standards for personnel protection.

Summary of content (4 pages)

PAGE 1
SM30 Series 30 mm Barrel Sensor Opposed-Mode Infrared Photoelectric Sensors for Especially Demanding Applications • Stainless steel or plastic barrel models • Very high excess gain; 150 m (500 ft) sensing range; 880 nm Infrared LED • Positive sealing eliminates even capillary leakage; lens is quad-ring sealed; exceeds NEMA 6P (IP67) ratings – ideal for equipment wash-down environments • EZ-BEAM® technology provides reliable sensing without the need for adjustment • Modulation frequency “A” is standard; freq
PAGE 2
SM30 Series 30 mm Barrel Sensor Specifications Supply Voltage and Current Emitters: 12 to 240V ac (50/60 Hz) or 10-30V dc at 20 mA, 10% maximum ripple DC Receivers: 10 to 30V dc at 10 mA maximum (exclusive of load); 10% maximum ripple AC Receivers: 24 to 240V ac (50/60 Hz) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration DC Receivers: Bi-Modal™ output (PNP sourcing or NPN sinking).
PAGE 3
SM30 Series 30 mm Barrel Sensor Performance Curves Excess Gain Curve Beam Pattern 100000 SM30 Series Opposed Mode 10000 E X C E S S 1500 mm SM30 Series 60 in 1000 mm Opposed Mode 40 in 500 mm G A I N 20 in 0 1000 100 0 500 mm 20 in 1000 mm 40 in 1500 mm 60 in 10 0 45 m 150 ft 90 m 300 ft 180 m 600 ft 225 m 750 ft DISTANCE 1 1m 3.
PAGE 4
SM30 Series 30 mm Barrel Sensor Quick-Disconnect (QD) Cables Style Model Length 3-pin Mini-Style SM30CC-306 SM30CC-312 2 m (6.5') 4 m (12') Connector Use with Emitters and AC receivers 4-pin Mini-Style 2 m (6.