User Manual

Printed in USA 10/04 P/N 116160
Installation
Guide
S18 Sensors – ac-Voltage Series
Self-contained, ac-operated sensors
* Standard 2 m (6.5') cable models are listed.
• 9 m (30') cable: add suffix “W/30” (e.g., S183E W/30).
• 4-pin Micro-style QD models: add suffix “Q1” (e.g., S183EQ1). A model with a QD connector
requires a mating cable.
†
Use polarized models when shiny objects will be sensed.
Sensing Mode Range LED Output Model*
Opposed
20 m
(66')
Infrared
950 nm
– S183E
LO
S18AW3R
DO
S18RW3R
Retro-
reflective
†
2 m
(79")
LO
S18AW3L
DO
S18RW3L
Polarized
Retro-
reflective
†
Visible
Red
680 nm
LO
S18AW3LP
DO
S18RW3LP
Diffuse
100 mm
(4")
Infrared
880 nm
LO
S18AW3D
DO
S18RW3D
300 mm
(12")
LO
S18AW3DL
DO
S18RW3DL
Fixed
Field
25 mm (1")
cutoff
LO
S18AW3FF25
DO
S18RW3FF25
50 mm (2")
cutoff
LO
S18AW3FF50
DO
S18RW3FF50
100 mm (4")
cutoff
LO
S18AW3FF100
DO
S18RW3FF100
Additional information on this product is immediately available online at www.bannerengineering.com/116160
View or download additional information, including excess gain curves, beam patterns and accessories.
For further assistance, contact a Banner Engineering Applications Engineer at [phone] or [phone].
Dimensions
104.1 mm*
(4.10")
63.2 mm
(2.49")
Yellow LED
Output Indicator
Green LED
Power Indicator
*Polarized retro and fixed-field models = 105.1 mm (4.14")
Cabled Models
QD Models
85.3 mm*
(3.36")
63.2 mm
(2.49")
Yellow LED
Output Indicator
Green LED
Power Indicator
*Polarized retro and fixed-field models = 86.3 mm (3.40")
P
LISTED
R
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult
your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel
protection.
!
bn
bu
bk
20-250V ac
Load
Cabled Emitters
20-250V ac
No Connection
rd/wh
rd/bk
rd
gn
bn
bu
20-250V ac
All Other Cabled Models
QD Emitters
(4-pin Micro-Style)
All Other QD Models
(4-pin Micro-Style)
20-250V ac
No Connection
Load
rd/wh
rd
rd/bk
gn
Jan 2013
p/n 116160 Rev. A