User guide

Q45BW22 Series
page
10
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]
Accessories
Retroreflective Targets
Banner offers a wide selection of high-qualitity retroreflective targets. See the Accessories
section of your current Banner Photoelectric Sensors catalog for complete information.
NOTE: Polarized sensors require corner cube type retroreflective targets only. Non-polarized
sensors may use any retroreflective target.
45LM58
45LM58D
45LMD
Programmable output timing logic
Programmable output timing logic plus signal strength display
Signal strength display only (no timing function)
Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a seven-element
display which gives a more precise indication of excess gain than does the AID™ system LED that is standard on Q45 sensors. The modules
listed below may be used with all Q45VR2 sensors. See the data sheet packed with the module for more information.
Model Logic and/or Display Function
Output Timing Logic and Signal Strength Display Modules
Quick-Disconnect Cables
4-Pin
Micro-style
Female
Pin-out
Straight
MQAC-406
MQAC-415
MQAC-430
2 m (6.5')
5 m (15')
9 m (30')
Cable: PVC jacket, polyurethane connector body; nylon coupling nut (Mini), chrome-plated brass coupling nut (Micro)
Conductors: 18 AWG (Mini), 22 or 20 AWG (Micro) high-flex stranded, PVC insulation, gold plated contacts
Temperature: -40° to +80°C (-40° to +176°F)
ø1/2-20UNF-2B
ø15 mm
(0.6")
44 mm max.
(1.7")
Green Wire
Red/Black
Wire
Red/White
Wire
Red Wire
3-Pin
Mini-style
Female
Pin-out
Straight
MBCC-306
MBCC-312
MBCC-330
2 m (6.5')
4 m (12')
9 m (30')
7/8-16UN-2B
ø28 mm max.
(1.1")
61 mm max.
(2.4")
Style
Brown Wire
Blue Wire
Black Wire
Model Length Dimensions Pin-Out (Female View)