Manual

SMBPVA11 Mounting Bracket Kit
Used for Mounting Parts Verification Array Sensors
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com
Printed in USA
11/03
P/N 115435
Features
• Pair of 2-piece swivel brackets for mounting to 1
5
/
16
" metal rack system
• Mount directly to sensor or to SMBPVD100(225) protective brackets
• Designed for mounting sensor to “look down” or at an angle ±90°
35 mm
(1.38")
23.9 mm
(0.94")
18 mm
(0.71")
10 mm
(0.39")
13 mm
(0.51")
17.5 mm
(0.69")
34 mm
(1.34")
17.2 mm
(0.68")
17.5 mm
(0.69")
35 mm
(1.38")
56.9 mm
(2.24")
Shown with sensor and bracket
SMBPVD100A (not included)
Includes: (4) M4 lockwashers
(4) M4 screws

Summary of content (1 pages)