User guide

Measure Tool Geometric Find/Count Tab
On the Geometric Find tab, use the drop-down list to select either to Measure From the Reference Point or
the Current Point.
On the Geometric Count tab, use the up or down arrow keys to select the Barcode to measure to. ClickMeasure
Tool7.4.4 Measure Tool on page 143 for more information about the Measure tool.
Geometric Find and Geometric Count Tabs
P/N 000000Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: [phone]
156
7/2009PresencePLUS Software Tools