Owner's manual

last displayed inspection. Each tool in the list can be expanded to show its results. Each result shown indicates
the tolerance assigned to the parameter and its current value.
• If the current value falls within the Test tool’s set tolerance or if the tool executed properly, then a
green checkmark symbol is shown beside that parameter.
• If the current value falls outside the Test tool’s set tolerance or if the tool failed to execute properly,
then a red failed symbol is shown beside that parameter.
DescriptionParent LevelLevelName
Name of currently running inspection.NoneFirstCurrent Inspection
Sensor Information:Inspection NameSecondThe Camera
• Gain
• Exposure time (ms)
Trigger Input Information:Inspection NameSecondThe Trigger
• Divide
• Delay
• Width
• Polarity
General Inspection Information:Inspection NameSecondThe Inspection
Manager
• Fail hold time (ms): how long a failed image is
displayed on the monitor
P/N 000000Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: [phone]
216
7/2009Run Screen