Owner's manual

DescriptionValueData Label
Slowest recorded tool processing time since the start of the
inspection or since power-up.
msExecution Time Max
Total number of bright-to-dark edges.whole numberBright-to-Dark Count
Total number of dark-to-bright edges.whole numberDark-to-Bright Count
Total number of all edges.whole numberTotal Edge Count
X, Y coordinates of all the edges found.pixels (X, Y)Location(s)
Communication Tool Exportable Results: Geometric Count Tool
DescriptionValueData Label
User-defined namestringTool Name
1 = Tool executed successfully
0 = Tool did not find a point to use as a reference
1 or 0Success
Tool processing time for the current inspection.msExecution Time
Fastest recorded tool processing time since the start of the inspection
or since power-up.
msExecution Time Min
Slowest recorded tool processing time since the start of the inspection
or since power-up.
msExecution Time Max
Total number of patterns above the minimum acceptance leval and
below the maximum number of patterns.
whole numberMatch Count
X, Y coordinates of the point from ROIs will rotate.pixels (X, Y)Rotation Origin
Rotational value of the first pattern found.degreesMatch Rotation
X, Y coordinates of the first pattern found.pixels (X, Y)Best Match Location
Point
Percent match of the first patttern found.20-100%Best Match %
Communication Tool Exportable Results: Object Tool
DescriptionValueData Label
User-defined namestringTool Name
Tool processing time for the current inspection.msExecution Time
Fastest recorded tool processing time since the start
of the inspection or since power-up.
msExecution Time Min
Slowest recorded tool processing time since the start
of the inspection or since power-up.
msExecution Time Max
Total number of dark objects.whole numberDark Count
Total number of all objects.whole numberTotal Object Count
Width of the smallest bright object found.pixelsMin Bright Object Width
P/N 000000Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: [phone]
130
7/2009PresencePLUS Software Tools