Owner manual

7.2 Location Tools
Location tools are used as a reference point to adjust the location of subsequent Regions of Interest (ROI) for translational
and rotational variations of the target.
7.2.1 Locate Tool
The Locate tool locates the position of a target in a field of view. This tool finds and marks position of the first edge
along the ROI line. Typically, tools, including additional Locate tools that follow, are relative to this point. Additionally,
the software can calculate the angle at which the Locate tool intersects the feature's edge and rotates following tools
Regions of Interest (ROIs) accordingly.
Usage
The Locate tool is used to align and position Vision tools consistently over the feature of interest.
Fields
The following are fields on the Locate tool Input tab:
• Threshold Type on page 96
• Filters on page 98
• Results on page 99
• Select on page 99
Supported Platforms
BCR/BCR
1.3
GEO/GEO
1.3
EDGE/EDGE
1.3
AREA/AREA1.3OMNI/OMNI
1.3
OMNI
Color
ProII/ProII
1.3
ProII Color
YesYesYesYesYesYesYesYes
Locate Tool Tabs
Banner Engineering Corp.Minneapolis, MN USA94
2/2010PresencePLUS Software Tools