Owner manual

6.10.1 Standard Mode

Choose this option to reset all tool conﬁguration settings for the connected sensor to the factory defaults.

6.10.2 Enhanced Mode

Choose this option to enable all tools and all tool's enhanced features for the connected sensor.

6.10.3 Custom Mode

Choose this mode to customize the tools conﬁguration settings within the tree view. This mode is automatically selected

when changes are made to the tree view.

The Tool Conﬁguration settings will only affect the sensor that the PresencePLUS software is connected - these settings

are stored with the sensor. Therefore, if the PresencePLUS software connects to a different sensor, then that sensor's

tool conﬁguration will be reﬂected within the PresencePLUS software.

This feature is available when connected to sensors with 2008R1 or newer versions of ﬁrmware.

91Minneapolis, MN USABanner Engineering Corp.

System Setup Dialog2/2010