Owner manual

DescriptionStrobe Width Option

The strobe output remains active (light on).On

The strobe output is active only while the sensor is

acquiring an image. This is the default.

Exposure Duration

Sets the duration for active strobe output from the initial

valid trigger (minimum pulse width has been satisﬁed) to

the end of the duration. The range is from 0 to 4,000 ms.

Time Duration

6.4.2 Level

• Active Low -- When given a 0V dc signal, it turns on. This is the default.

• Active High -- When given a +5V dc signal, it turns on.

6.5 Units Tab

By default, the sensor expresses all distance calculations as pixels:

• Conﬁgure a scale value based on a known distance in user-selected units (for example, inches, millimeters, or

centimeters) See Conﬁgure with Known Distance on page 84 for more information.

Units Tab

Banner Engineering Corp.Minneapolis, MN USA82

2/2010System Setup Dialog