Owner manual

CommentsOptional
Qualifiers
Required
Qualifiers
Support ActionsObject or
Activity
Identifier
System Object,
Component, or
Activity
Get the camera
exposure
NonePositive NumberSETEXPOSUREExposure
Enables frame
number as
NoneENABLESETFRAMETAGFrame Number
Tag
command
acceptance
indicator
Disables frame
number as
NoneDISABLESETFRAMETAGFrame Number
Tag
command
acceptance
indicator
Retrieve the status
of the frame tag
indicator
NoneNoneGETFRAMETAGFrame Number
Tag
Coordinate tool
Commands
DescriptionSyntax
Returns the specified Coordinate tool output.set coordtool tool_name|tool_number x\y|angle
Gets the valueget coordtool tool_name|tool_number x\y|angle
Math tool and the Remote Command Channel
Commands
DescriptionSyntax
Sets the specified tool operand, if it is a constant.
Value should be a floating number.
set mathtool tool_name|tool_number value operand_1|operand_2
Gets the value of the specified tool operand, if it
is a constant.
get mathtool tool_name|tool_number operand_1|operand_2
String tool
Commands
DescriptionSyntax
Sets the specified tool operand, if it is a constant.
Value should be a quoted string (see Character
Strings on page 327).
set stringtool tool_name|tool_number operand_1|operand_2 value
Gets the value of the specified tool operand, if it
is a constant.
get stringtool tool_name|tool_number operand_1|operand_2
57Minneapolis, MN USABanner Engineering Corp.
System Setup Dialog2/2010