Owner manual

CommentsOptional
Qualifiers
Required
Qualifiers
Support ActionsObject or
Activity
Identifier
System Object,
Component, or
Activity
If no qualifiers are
specified, a 30
Timeout (msec)
or
NoneEXECTRIGGERTrigger
second timeout is
used.NOWAIT
By default, a 30
second timeout is
used.
Timeout (msec)
or
NOWAIT
Numeric Inspection
ID
EXECPRODCHANGEProduct Change
Reset either the
System Error Flag,
NoneSYSERRFLG
or
EXECRESETCounter or Flag
Reset
Pass and Fail
PASSFAILCNT counters, or
Missing Trigger
count.
or
MISSTRIGCNT
Enables remote
teach. If no
TRIGGER or
TRIGGER
NoneEXECRTEACHRemote Teach
qualifiers areNOWAIT or
specified, remoteTRIGGER
Timeout (msec) teach will occur on
the next trigger. If
TRIGGER
qualifier is
specified, remote
teach will occur
immediately, and
the command will
block until a
default 30-second
timeout expires. If
TRIGGER
NOWAIT is
specified, remote
teach will occur
immediately, and
the command will
return right away.
If a timeout value
is specified, the
command will
block until the
specified timeout
expires.
Retrieve the sensor
online status.
NoneNoneGETONLINESTSOnline Status
Returns 1 if the
camera is ready, 0
otherwise
NoneNoneGETREADYFLGReady State
55Minneapolis, MN USABanner Engineering Corp.
System Setup Dialog2/2010