Owner manual

4.4.1 Trigger Settings

DescriptionField

Sets the sequence of valid triggers. If set to 1, an image is captured in response to every

valid trigger; if set to 2, and image is captured in response to every second valid trigger,

and so on.

Trigger Divide (range:

1-10,000 triggers)

Fixed time (ms) from the instant the Sensor receives a valid trigger to the instant the

Sensor captures the image.

Trigger Delay (range:

0-8,000 ms)

Eliminates unwanted triggers by accepting triggers only if they are above a speciﬁed

duration.

Minimum Trigger Width

(range: 1-8,000 ms)

Choose Leading Edge to capture images at the leading edge of a trigger signal. Choose

Trailing Edge to capture images at the trailing edge of the trigger signal.

Polarity

4.4.2 Resolution

Increases or decreases the resolution on the displayed image. A lower resolution will have a faster PC update. The

resolution does not change the inspection. Resolution options are 1:1, 4:1, 16:1, and 64:1.

31Minneapolis, MN USABanner Engineering Corp.

Setup2/2010