Owner manual

DescriptionValueData Label
Centroid of the largest Blob.pixels (X, Y)Largest Location
Number of pixels in the smallest Blob.pixelsSmallest Blob Area
Centroid of the smallest Blob.pixels (X, Y)Smallest Location
Communication Tool Exportable Results: Edge Tool
DescriptionValueData Label
User-defined namestringTool Name
Tool processing time for the current inspection.msExecution Time
Fastest recorded tool processing time since the start of the inspection
or since power-up.
msExecution Time Min
Slowest recorded tool processing time since the start of the inspection
or since power-up.
msExecution Time Max
Total number of bright-to-dark edges.whole numberBright-to-Dark Count
Total number of dark-to-bright edges.whole numberDark-to-Bright Count
Total number of all edges.whole numberTotal Edge Count
X, Y coordinates of all the edges found.pixels (X, Y)Location(s)
Communication Tool Exportable Results: Geometric Count Tool
DescriptionValueData Label
User-defined namestringTool Name
1 = Tool executed successfully
0 = Tool did not find a point to use as a reference
1 or 0Success
Tool processing time for the current inspection.msExecution Time
Fastest recorded tool processing time since the start of the inspection or
since power-up.
msExecution Time Min
Slowest recorded tool processing time since the start of the inspection or
since power-up.
msExecution Time Max
Total number of patterns above the minimum acceptance leval and below
the maximum number of patterns.
whole numberMatch Count
X, Y coordinates of the point from ROIs will rotate.pixels (X, Y)Rotation Origin
Rotational value of the first pattern found.degreesMatch Rotation
X, Y coordinates of the first pattern found.pixels (X, Y)Best Match Location
Point
Percent match of the first patttern found.20-100%Best Match %
Banner Engineering Corp.Minneapolis, MN USA252
2/2010PresencePLUS Software Tools