Owner manual

set ocvtool 2 "foobar"
To get the constant of the second ocvtool, issue the following command:
get ocvtool my_ocv_tool_2
Get Command Example
or
get ocvtool 2
7.6 Analysis Tools
Analysis tools analyze the information gathered with the Vision tools to create measurements and tolerances for the
Vision tools.
Analysis Tools
BCR/BCR
1.3
GEO/GEO
1.3
EDGE/EDGE
1.3
AREA/AREA1.3OMNI/OMNI
1.3
OMNI
Color
ProII/ProII
1.3
ProII
Color
Location
Tools
NoNoNoNoYesYesYesYesCoordinate
Tool on
page 259
YesYesYesYesYesYesYesYesCommunication
Tool on
page 244
YesYesYesYesYesYesYesYesMath Tool
on page 263
YesYesYesYesYesYesYesYesMeasure
Tool on
page 268
YesNoNoNoYesYesYesYesString Tool
on page 290
YesYesYesYesYesYesYesYesTest Tool
on page 297
7.6.1 Communication Tool
The Communication tool is used to conditionally export data from the Sensor to an external device. Results from
Vision tools can be selected by the Communication tool and exported to an external device. The Sensor can export
data over the Ethernet or via its serial channels.
Examples of exported results
• Execution times
• Whole-number counts
• Input and output values from a Test tool
• Success from Locate and Test tools
• Reference point-to-edge and rotation distances
Fields
Banner Engineering Corp.Minneapolis, MN USA244
2/2010PresencePLUS Software Tools