Owner manual

Additional InformationDescriptionCharacter
Settings
software should ignore where one
character box ends and where the next
character box begins.
Use the up and down arrow controls
to specify the stroke thickness of the
Min Stroke
Thickness
characters. This is used to eliminate
spurious marks that might result in
false-positive identification of
characters.
Enhanced Character Settings
The enhanced OCR/OCV settings provide for fine-tuning how the sensor boxes characters. To enable Enhanced
OCR/OCV tools:
1. Click the System button on the UI to display the System Setup dialog.
2. Select the Tools Configuration tab.
3. Check the box next to Enhanced under OCR and/or OCV.
213Minneapolis, MN USABanner Engineering Corp.
PresencePLUS Software Tools2/2010